Skip to content
[4-2-2-2] Direct Connect
Quake Champions

[4-2-2-2] Direct Connect

Configure Quake Champions Direct Connect settings: COM port, IRQ, and baud rate (9600-57600).

By ···10 min read·Multi-source verified
1 reading this guide  

Configure Quake Champions Direct Connect settings: COM port, IRQ, and baud rate (9600-57600).

Walkthrough
  1. 1
    Port: Select the COM port your modem is connected to.
  2. 2
    IRQ: This setting automatically adjusts when you change the 'Port' setting. Avoid manual changes unless you are experienced.
  3. 3
    Baud: Set the baud rate for your COM port. Higher rates are not always superior. The minimum acceptable baud rate is 9600, and the maximum is 57600.
  4. 4
    OK: Select this option to wait for an incoming connection.
Tips
  • Do not manually alter the IRQ setting unless you have specific knowledge.
  • Experiment with baud rates between 9600 and 57600 to find the optimal setting for your connection.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content