Welding and Unwelding Objects

Learn to weld and unweld objects in Garry's Mod using the Tool Gun. Master rigid connections for building complex contraptions.

3.1. Welding and Unwelding Objects

Mastering the art of connecting objects is fundamental to building complex contraptions in Garry's Mod. Welding allows you to fuse props together, creating rigid structures that behave as a single unit. This section details how to effectively use the Weld tool, its various settings, and how to detach objects when needed.

The Weld tool, accessible from the Tool Gun (press 'Q' by default), is your primary instrument for joining props. To weld two objects, select the Weld tool, then left-click on the first object, and then left-click on the second object. The objects will then be permanently fused together, sharing their physics properties. This is crucial for building vehicles, machinery, and any structure that needs to maintain its form under stress.

Using the Weld Tool:

1. Open the Tool Gun ('Q').
2. Navigate to the 'Weld' tool category.
3. Select the 'Weld' tool.
4. Left-click on the first prop you wish to weld.
5. Left-click on the second prop.

The weld is created at the point where you clicked on each prop. For more precise control, you can use the 'Advanced Weld' tool, which allows you to specify the exact points of connection and even the orientation of the weld. This is invaluable for creating complex joints and mechanisms.

Weld Tool Options:

To detach objects that have been welded, you can use the 'Unweld' tool, also found within the Weld tool category. Simply select the Unweld tool and left-click on any part of the welded structure. This will break all welds connected to that part. Be mindful that unwelding can cause structures to collapse if they are not supported. Experiment with different welding techniques to understand how they affect the stability and behavior of your creations.