Chamber 1: Sensitivity Training

You'll start in a room with a robot. Your first move is to quickly jump up to the platform above. Stand right in the path of the sensor there – this will open the door for the walking robot. Once it passes you, drop back down. Let the robot walk all the way to the end and start heading back. When it's directly over those yellow and black trap doors, position yourself on the sensor to the left and slightly below and to the right of you.

Now, follow that robot! It'll walk towards a wall. As it gets close, you'll need to jump over it. This action triggers a sensor that opens the door to the terminal. After you hack it, you'll enter a new area where the floors start to rise whenever you step on a horizontal floor sensor. To get to the terminal on the far side, you'll need to keep making long jumps.

Once you hack this terminal, the walls will start closing in. Again, you'll need to make long jumps across the floor. Here's a crucial tip: the upper route that opens up is a trap! You need to be fast and crouch through the lower-left section, near the first sensor. After that, drop down through the vertical sensor to the floor below.

Next up, you'll encounter a sensor that deactivates the floor laser. Make sure you don't duck at all here – just run straight through and jump up to the platform on your right. Hack the terminal there, then jump back to the platform you were just on. From there, quickly jump up to the higher platform where the robot is. Your goal is to reach the spot where the two sensors cross *before* the robot spots you. Do this while the robot is still over the trapdoors, and it'll drop to the lower floor, disabling the laser.

Finally, just run to the right, jump up to the higher platform, and then drop down to the terminal. After you hack it, the exit will open up. You can grab the **[Helix]** if you need it, but it's not essential to escape.