Skip to content
DRIFTING/OVERSTEER
Gran Turismo 3: A-Spec

DRIFTING/OVERSTEER

Learn how to tune your car for drifting and oversteer in Gran Turismo 3: A-Spec by adjusting stabilizers, LSD, tires, and more.

By ···10 min read·Multi-source verified
1 reading this guide  

Learn how to tune your car for drifting and oversteer in Gran Turismo 3: A-Spec by adjusting stabilizers, LSD, tires, and more.

Walkthrough
  1. 1
    Increase your rear stabilizer and decrease your front stabilizer.
  2. 2
    Set the rear toe in.
  3. 3
    Set the front camber a little higher.
  4. 4
    Turn off or significantly lower the ASM (Active Stability Management) and TCS (Traction Control System).
  5. 5
    Lower the Acceleration value on the LSD (Limited-Slip Differential), and potentially the Deceleration and Initial Torque values as well.
  6. 6
    Consider using less grippy tires in the rear.
  7. 7
    Stiffen your rear spring rates to keep weight on the front tires.
Tips
  • Do not apply all these changes at once; tweak settings gradually.
  • Avoid making extreme adjustments.
  • The goal is to make your car understeer less, aiming for either a neutral or oversteering balance for drifting.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content