Part III

You regain control in the central section at the base of the station, with access to most Universal modules. You can switch back to EAS using the left button on the D-pad from the station map screen. RU and CN modules are listed but inaccessible.

Collectibles are now available. In UC-01 "Central", on Camera A, find Data Points 66, 7, and 47 on a laptop on the desk to the right.

In ULA "Link A", switch to Camera B and find Data Point 19 on the laptop to the right, mounted on the wall.

Go to UN-02 "Kepler-2". On Camera A, find the low-power laptop. Turn on the power caddy to its left to access Data Point 21 on the laptop. Pan right on the same camera to find Data Point 38, a polaroid attached to the bulletin board above the sleeping bag.

In UN-07 "Endomed", on Camera A, find the low-power laptop to the lower right. Turn on the power caddy above it to get Data Point 8. Switch to Camera C, pan up and left to find Data Point 32 on a document held to the wall by a yellow clip.

In UN-04 "Vita", switch to Camera C. Find a locked laptop to the right. On Camera A, locate the sticky note with the PIN "2491" on a blue board near the top. Return to Camera C, input the PIN to unlock Data Point 23. Switch to Camera B, look down and right to find Data Point 39 on the floor near the red panel.

In UN-06 "Kerch Strait", on Camera B, find a low-power laptop. Turn on the power caddy to its right to access Data Point 14.

In UN-05 "Storage", switch to Camera B and pan left to find Data Point 37 on the back of a storage box. Switch to Camera C, center the blue desk, and look right for a laptop to get Data Point 2.

On Camera C in UN-05 "Storage", look down and slightly left to find the SAM plushie. Interact with it for dialogue and an achievement.

Access Station Alerts via the menu button, then the right bumper on the relocation map. Complete the alert on the far right by clicking the "ACTION: Inform Crew" button.

Complete the alert to the left of the first, regarding EAS-10 cameras. If you missed Data Points 1, 52, and 61 from Part I, switch to Camera B in EAS-10, turn on the power caddy to the lower right of the laptop, and pair with the laptop for 1 and 52. Scan the EMU Unit at the ceiling for 61.

Complete the middle alert about Crew Tracker Sensors. Click "ACTION: Inform Crew". The sensors are marked by a green hexagon on the Relocation Map legend. They are located in UN-01 "San Mateo-Forth", UN-03 "KH-Z-Macau", and UN-06 "Kerch Strait".

Go to UN-01 "San Mateo-Forth". On Camera A, locate the sensor (rectangular screen with a wi-fi box above it) to the upper-right of the door. Connect, click "Enable Sensor Power Control", then "Adjust" (move the left stick up). Click "Enable Sensor Calibration Test".

For the colorblind calibration in UN-01: Click the grey "Sensor Calibration Test" button. The game shows a color to the left of the arrow. Click on squares of that same color in the mess of colors; they will change to the color shown to the right of the arrow.