Skip to content
Eradicate!
Borderlands: The Pre-Sequel

Eradicate!

Complete the 'Eradicate!' mission in Borderlands: The Pre-Sequel. Follow our walkthrough to find the laser drill, cranial interface, and sensor array in the Veins of Helios.

By ··10 min read·Multi-source verified
1 reading this guide  

Complete the 'Eradicate!' mission in Borderlands: The Pre-Sequel. Follow our walkthrough to find the laser drill, cranial interface, and sensor array in the Veins of Helios.

Walkthrough
  1. 1
    Accept the mission from Tassiter in Jack's Office or from the Bounty Board.
  2. 2
    Travel to the Veins of Helios.
  3. 3
    Collect the laser drill from a platform with a jump pad.
  4. 4
    Jump down into the long shaft, exit into space, and use the northeast jump pad to reach a platform.
  5. 5
    Use the jump pad that launches you straight up to find the cranial interface.
  6. 6
    From this platform, jump to the nearest building, then to the eastern building and use its jump pad.
  7. 7
    Use the subsequent jump pad to reach the sensor array.
  8. 8
    With all three parts, go to Central Maintenance and use the scanner to assemble the bot.
  9. 9
    Lead the assembled bot to the quarantined zone, to the room with the bug burrow where Eghead the Engineer is located.
  10. 10
    Either kill Eghead yourself or let CL4P-L3K kill him (optional objective).
  11. 11
    Deal with the robot: either shoot it until it dies, or trap it using the nearby console.
  12. 12
    Return to the bounty board in Jack's office to complete the mission.
Tips
  • The assembled robot will fire electric shots and can kill you, so be careful.
  • If you trap the robot using the console, you can return later to farm it for drops. Killing it now prevents this.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content